Interfill is an easy to sand, finishing filler that corrects minor surface defects before the final coat. Soft and easy to use, you can apply it using a trowl, filling. A light weight two pack low to medium density epoxy based filling and fairing material. Interfill is an easy to sand, finishing filler that corrects minor surface defects before the final coat. For use over Interfill , it can be applied using a trowel.
|Published (Last):||14 June 2006|
|PDF File Size:||12.25 Mb|
|ePub File Size:||9.23 Mb|
|Price:||Free* [*Free Regsitration Required]|
Maggiori informazioni Read more. The information given in this sheet is not intended to be exhaustive.
International Interfill 833 Part B 5 Lt #458COL1126
Mix the two components thoroughly to an even colour. Ultrafine additives give an extra-smooth finish. Do not apply more than recommended WFT at any one time. View Comparison Go to login page Close. Quick Overview Interfill is a technically advanced, easy sand Epoxy Finishing Fairing Compound for use over Interfill profiling filler to correct minor surface defects before application of finishing coats.
Designed and developed by Aztek Company no: Ventilation and Humidity Control: Add to Basket Add to Compare.
Interfill – Seaware – Wholesale Marine & Fastenings
Sand smooth with grit paper. Once the sandable time has been exceeded, all fillers should be sanded before overcoating to promote good adhesion. Exposure to air and extremes of temperature should be avoided. Terms and Conditions Contact us. We stock a wide range of items such as: Recommended wet film thickness WFT per coat microns intetfill trowel or palete knife.
Keep out of direct sunlight. Pack of 5 liters. Utilizzando tali servizi, accetti l’utilizzo dei cookie da parte nostra. Apply firmly in a spreading action. Don’t have an account. After 3 months the filler must then be re -sanded before intergill. Remainders of Interfill cannot be disposed of through the municipal waste ingerfill or dumped without permit.
You may also be interested in the following product s. Interfill is a technically advanced, easy sand Epoxy Finishing Fairing Compound for use over Interfill profiling filler to correct minor surface defects before application of finishing coats.
Read the label safety section for Health and Safety Information.
Remove all sanding residue using a clean air line and sweeping with a clean brush or broom. Interfill should be kept in securely closed containers during transport and storage. All previous coatings should be knterfill back to solid material and filled with Interfill Call us on